Though Moen plumbing products are well known for their durability and reliability, they are still subject to dripping or leaking, just like any other brands. More often with the Moen brand, the problem is caused by a worn out kitchen faucet cartridge.

If you are having this type of problem and you happen to be a do-it-yourself kind of individual, then you can definitely fix the problem without having to consult a professional. In the process, you will also save money.

Before you start with the fixing procedure though, you have to make sure that you have all the things you need at hand. You don’t want to be half way through and then realize you don’t have the right screwdriver or replacement part available do you?

Okay, so here are the things you need:

– The replacement cartridge of course – this available from your local home improvement shop. Since there are four different Moen fixture parts like this, you need to take the old one with you when you go to the shop so the salesperson can give you the right kind
– A pair of slip-joint or channel lock pliers
– A crescent wrench
– A small flat head screwdriver
– A Phillips screwdriver

How do you remove and replace this part of the fixture?

1. Cut off the water supply.
2. Using the flat head screwdriver, remove the cap on the fixture handle
3. Next use the Phillips screwdriver to remove the retaining screw from the handle. Remove the handle.
4. Use the crescent wrench or your pliers to remove the keeper ring.
5. Remove the old cartridge. You may have some difficulty doing this as it is snugly fitted on the fixture so use the small flat head screwdriver to make a little space then use your pliers to pull it straight up.
6. Install the replacement part. The part of the fixture you are replacing has a tooth that goes to a slot on the assembly. This component cannot go in any other way.
7. Replace the keeper ring and then the fixture’s handle and cap.
8. Turn the water supply on.

Some important points when replacing a kitchen faucet cartridge for the Moen brand fixture:

– if some parts are stuck together, use a spray lubricant to get them moving again
– in case you don’t have a small screwdriver, you can improvise and use other tools or other edged rigid metal implements
– you may not have to replace this component on the cold water side as it is only the hot water side that usually ends up having this part damaged or worn out

Article Source:http://ezinearticles.com

Find out more on the subject of avoiding a few of the common and widespread plumbing inconveniences in your home. Many plumbing problems may be elude contingent upon the time of season. Chilly fall temperatures serve as a courteous reminder that once winter arrives it may be surprising, often catching proprietors unprepared for winter plumbing inconveniences associated with extreme cold. Look here for valuable plumbing tips to keep your plumbing system running well during winter.

Turn off outdoor water hoses. If it is still connected, water inside the hoses can freeze and expand bringing about spouts and connecting pipes in your house to ice up and break down.

Ensure external taps are not leaking out or pouring out. Contact a plumbing contractor to take care of the crucial fixes before freezing temperatures arrive. Understand that once pipes ice up, water pressure grows and induces cracks – no matter whether pipe is composed of copper, plastic, or steel. Even a very little fracture might generate beyond 250 gallons of water in just one calendar day.

If your house has interior shut-off valves giving rise to outdoor spouts, disconnect them and drain water from lines.

Pad pipes in heat less vicinity, such as crawl or garages spaces. Position heating stripe or thermostat-controlled heat cables all over the pipes that are exposed and vulnerable to freezing.

Your water heater is working even harder at the time of wintertime months. Have a plumbing service professional flush it away and remove deposit buildup, which causes corrosion, shortens the length of life and reduces warming functionality.

Once departing from your residence for extended periods of time, shut off the major water regulator and take the water out by releasing open faucets at the highest and lowest places of the house.

Put into use the above mentioned helpful plumbing info and tips to increase the life span of your plumbing system in the course of wintry weather. It’s recommended to seek professional aid to winterize the plumbing system in your property.