Tag Archives: Emergency Plumber

How to Locate The Really Best plumbing Service Contractor.

plumbing problems

A reliable plumbing contractor is resourceful and full of ideas. The contractor you hire should be able to give you or your business ways to improve on your concepts of what the project should look like when completed. With that said, the plumbing repair contractor will be a huge asset to you and your service company. Find out more on how to find a resourceful and valuable contractor from the advice listed below.

Start your search for potential plumbers by obtaining several resumes, this will help you uncover what is important to look for and narrow your list of potential contractors. Any plumbing repair contractor who is not even interested in sending you a resume will not be invested once a project starts.

Make sure you ask the contractors about their priorities while they will be handling your project. If you will that quality is there with high level of customer service, then don’t waste time and hire them. Make sure you don’t come under their cheesy words. You should check the references they have provided you in order to make sure that they are eligible for the work.

Make sure you ask for a list of the workers and plumbers who will be working on your home. This is crucial because you have to make sure who is going to be there, and some projects might include many people in your house at one time.

Know what is expected for your hire. Worker’s compensation is a must if the plumbing contractor is using workers on the job site. But, contractors not using workers are not needed to have workers compensation accounts. These are typically owner-contractors.

Develop preliminary project objectives and budget target before approaching the contractors and see how flexible they are regarding your plan. Flexibility shown and comparative analysis given by the contractors should be taken into considerations as it demonstrates the involvement with your project.

Make clear to your contractor that you expect they will only call you during specified hours. This will set a respectful, professional tone between you and lead to a better working relationship. If your contractor leaves messages for you, be prompt in responding to maintain the professional nature of your working relationship.

References from past clients are the most important pieces of information a potential contractor can offer. It speaks to their reputation, if a contractor does not provide a list of references, consider someone else.

Depending on what state you are in you might need an plumbing contractor with a license. Ask for a license up front and do a search of the license online on the state licensing website. If the search comes up positive then you are set to go but if it was negative you will run into issues.

How to Locate Water Leaks With Leak Detection

Leaking toilets, leaky pipes,leak detection, drippy faucets and Slab leaks are familiar plumbing emergencies that waste lots of water and millions of dollars in structural destruction. Fast leak detection saves a lot of water as-well-as high-priced repairs of defective ceilings, walls and floors.

Inadequate workmanship or low-grade installation of pipelines may give rise to domestic and industrial plumbing water seepage’s. Plumbing contractors single out leaks on regular plumbing maintenance to faucets, drains, toilets, bathtubs and sinks as a probable explanation for the development of water seepages. Rusted pipes, worn out valves and detached connections are accountable for water seepages.

Roughly 1 in each and every three hundred homes and constructed dwellings is at this moment dealing with water leakage. 1/8″ pit in pipe seeps out 2500 gallons in twenty four hours. A runny toilet can use up too 90,000 gallons in under a month. A drippy faucet or a oozy garden hose can waste close to one hundred and eighty gallons on a monthly basis and 2160 gallons per year.

Water leaks give off symptoms that can’t be ignored. Different water meter readings, sewer gas smells, high water bills, waterlogged patches, recurring sewer backwashes, and fungus are indicators of water seepages inside or outside your home. Taking action on the above mentioned symptoms will be sufficient at reducing water destruction. Switch off the main water supply to the home to stop water seepage. Contact a plumbing service provider for early on leak diagnosis and express repair leak detection.

1 in twenty pools spills water. Swimming pool water leaks are money and water guzzlers. A broken swimming pool shell, loose tiles, strange growth of grass or a loss of 0.125 inches of water in one day are obvious signals for swimming pool water leaks. Don’t delay fixing once those hints emerge. Call a leak detection service provider before additional ruin arises.

Plumbers carry above ground leak detection and underground slab leak detectors (plumbing services)slab leak repair

Winter maintenance tips for your home.

download
Keep your home warm and dry this season by reducing plumbing repairs before they happen – with some preventative maintenance, of course. Avoid the hazards of cold weather by completing these action items before the temperatures dip.
Check up on the heating and insulation system
If you live in a cold climate, the heating system will be running constantly during winter. This calls for proper cleaning, insulation and ventilation of your HVAC system, crawlspace and attic. Clean or change out your HVAC filter in preparation for heavy usage, and make sure the attic area is properly insulated. Insulation in the crawlspace and ceilings will keep the heat inside the living space and prevent warm air from escaping. Sealing the gaps around windows, plumbing, vents and lighting fixtures will also maximize energy efficiency in your property.
Prevent frozen pipes
Avoid frozen pipes this season – and all the collateral damage they can cause – by adding extra insulation to exposed pipes in the crawlspace, basement or attic. Damage due to frozen pipes is common but completely preventable. Taking the precaution to seal, insulate and wrap pipes will prevent cold air from getting into the pipes. Exterior faucets should be drained and shut off for the season. Educate your tenants about what they need to do when the temperature drops, such as leaving a trickle of water on overnight, leaving cabinet doors open, and keeping the thermostat at a consistent temperature.
Winter-proof the exterior
Your landscaping may have gone dormant, but you’re not done with yard work yet. Prevent damages from icy conditions by trimming trees and shrubs so they don’t brush up against the walls and windows. Regularly inspect your roof for the formation of ice dams, which can damage your roof and cause water leakage. Close any crawlspace vents in the foundation, and seal any cracks or small openings so small critters can’t burrow in. If your residents are taking care of snow removal on your property, move snow shovels and blowers to an accessible spot.
Prepare for the worst
A bad storm can result in a blackout or being snowed in. Remember to be prepared for the worst by keeping bottled water, non-perishable food, flashlights and emergency phone numbers on hand.


As seen on PlumberSpot.com

Any home can have a plumbing leak

plumbing repair

Any home can have a plumbing leak appear silently and invisibly. It can sometimes take days, even weeks to see the stain, puddle or leak. They can have ugly, costly, damaging results, especially if not discovered quickly enough.

To prevent the replacement of walls, ceilings or floors, projects than can cost thousands in a worst case scenario, it is best to discover how to detect leaks before they begin causing a scope of problems this big. Your home plumber in Charlotte NC can help with this task.
Begin By Tracking Your Water Meter Readings

Your water meter is there for very good reasons. It can help you discover if you have a leak somewhere in your home. To determine this, simply shut off all faucets and water-using appliances. Don’t flush the toilet during this time. After an hour, see if the water) meter reading has changed. If so, you may have a leak.

Next you should check all of the hose connections on all of your water-using appliances. Check them for bulges, drips, cracks and be certain they have a firm seal and connection. Feel and observe the floors under any of these appliances as well. Feel for wet spots and look for discoloration and dampness around or in cabinets and walls near the appliances as well.

Your home plumber in Huntersville NC will make a thorough investigation for leaks. The plumber will check tiled walls and floors, looking for missing or damaged grout. He will check for broken, cracked or missing shingles on your roof. He will also check the basement floor for any fissures or cement foundation movement – all signs that plumbing may have moved or shifted which leads to cracks, leaks and long-term damage.
Repairing Leaks Immediately Keeps Your Water Bill Down

The amount of money you save by repairing a leak will often pay for the cost of your home plumber in Huntersville from Charlotte plumbing & repair.

We will not only repair any leaks, we will also provide you with leak detection equipment so your water costs will remain under control from then on.

If you feel you can handle the repair on your own but need guidance, simply give us a call and we can talk you through it. Remember,detecting leaks early-on is critical.
Call Your Home Plumber: Charlotte Chooses Charlotte Plumbing & Repair.

Your home plumber in Charlotte is a family-owned business that has been serving the plumbing needs of Charlotte, NC for almost 20 years.
Charlotte Plumbing & repair Plumbers know how critical water waste is. This critical topic of discussion has only grown as Americans continue using huge quantities of water in their homes every day.

How much water is considered a huge amount? According to the Environmental Protection Agency (EPA), average American families with a minimum of four in the household use up to 400 gallons of water a day. This number is not connected to watering lawns and gardens – 70 percent of American water use is within the home.
A Few Water Facts

According to National Geographic the average American lifestyle is kept afloat by about 2,000 gallons of water a day including watering of lawns and washing of cars in the driveway— and this is actually twice the global average.

This doesn’t include the water people are drinking out and about during their day, or using when frequenting restaurants and others venues of entertainment.

The important thing to understand about why to save water, beyond what it costs in a month, is the need to pledge to cut your water footprint, so as a nation we can help restore our freshwater ecosystems.
Of course, the bathroom is where most water is always used. Every activity in your bathroom utilizes lots of water. Example: the average toilet uses up to 27 percent of all household water. Save 200 gallons a month by simply turning off the faucet while brushing teeth.
At Charlotte Plumbing & Repair your home plumber in Charlotte, NC, we provide every available plumbing update or repair service available in order to reduce your water waste and cost.
Plan To Schedule A Water Use Audit

We’ll analyze the usage in your home, and then discuss your daily lifestyle requirements and habits with you. We will then customize an efficient and simple plan to help reduce your daily water use and cost.

Whether it is your leaky washing machine hookup or a clogged drain, we will show up any time, day or night, for your overflowing toilet. For all plumbing repair emergency

Inquire about our other service contracts so that you, too, can be proactive with your home plumber in , Charlotte, NC.

Friendly Environmentally Plumbing

There are a lot of means we can ease our influence on the environment. Making your home plumbing system more environmentally friendly is among them. Greening up your plumbing will have direct perks on the environment, and will save you cash in the long run says Charlotte Plumbing & Repair.

These 5 enhancements to your plumbing system will make the basic things you do every day much better for the environment:

Plumbing Repair Huntersville.
A domestic continuous made by Rinnai in Japan.

Tankless water heater. These energy-saving appliances significantly minimize your environmental effect. Water is rapidly warmed by a heating aspect that provides hot water on demand without a holding tank. Rather of heating 40 or more gallons of water 24/7, tankless water heaters only heat the water you make use of.

Low-flow commodes, fixtures and faucets. We’ve come a long way since the first low-flow fixtures and toilets were introduced to the marketplace. New technology has actually made them not just more reliable, but more effective. Updating your plumbing system with eco friendly fixtures minimizes the amount of water you make use of, and the amount of water you spend for.

Efficient appliances. Anything that makes use of water in your home belongs to your plumbing system. That consists of dishwashers, automatic ice makers, laundry equipment, water heaters and centralized humidifiers. Water is becoming a progressively important resource. The quality and price of water depend on our efforts to make our home water utilize more eco friendly. Update your plumbing system with efficient home appliances that make the most utilize from the least water.

Aerators. Faucet aerators pressurize water that originates from your tap. By presenting air to the stream of water, aerators reduce water use without decreasing water pressure. Aerators frequently increase your water pressure while decreasing overall flow of water in a house.

Pipe insulation. Water heaters are typically located in the basement or remote area of a house. The further hot water needs to travel to the sinks and appliances in your house, the even more heat is lost through the pipes that bring it there. A simple means to maintain more of that heat is to purchase and set up pipe insulation around your hot water pipes. The versatile foam insulation is inexpensive and easy to install. More importantly, it will make your hot water use more reliable and ecologically friendly.

Charlotte Plumbing & Repair hope you take a look at our homepage here too! WWW.charlotteplumbingsvc.com

Plumbing vent types & Terms

Posted by: Charlotte Plumbing & Repair

Vents play a vital component in a home’s drainage program. A faulty venting program will not only trigger aggravation when the drainage system malfunctions, it could also make you and your loved ones ill if it compromises the seal that traps are supposed to maintain against sewer gas. It really is to recognize the various venting choices doable, at the same time as size and installation basics, in the event you program to alter or add your current method.

Venting Types and Terms:
Here are a couple of of essentially the most widespread kinds of events you will uncover within the home.

Vent Terminal: a vent terminal is roughly equivalent to the distance between floors, but as a result of layout considerations, it frequently starts a foot below one floor and ends of foot below the next.
Broken vent: the term broken vent refers to an improperly installed vent that, consistently is ineffective. A broken vent is a small far better than no vent at all.

Stack Vent: vertical drainage stacks are also considered events since furthermore to carrying water, they pull relief air from above the roof. Short horizontal branch lines extending from a vertical stack don’t need extra venting and therefore, are said to be stacked vented.

Vent Stack: a vent stack is a vertical stack installed from the sole purpose of providing relief air. It doesn’t carry water. A vent stack could be tied into the Stack vent above the highest fixture or exit the roof independently.

You may have observed plumbing diagrams within the past with vent stack beginning below the lowest fixture on the stack and continuing into the attic. All fixtures are shown connected to the Stack vent. Nonetheless, dedicated program wide vent stacks are rarely identified in residential installations. They work best in tall commercial buildings

Stack-Vented Branch Arm: in a correctly created method, fixture drain lines are sized so that they are able to by no means run a lot more than one half full. If a horizontal branch pipe isn’t too lengthy unused best half of the pipe can serve as a bank. It feeds air from the stack to the back of the flow, preserving the trap seal. But such a stack prevented branch arm is limited.

The branch need to serve the highest fixture or fix your combination on the stack. This highest fixture rule applies to every individual stack, even when the highest fixture on a second stack is really a floor or two above or below that of the primary stack, supplying that all stacks extend to the open air above the roof. This nevertheless, can have an exception: rules do not apply to a basement bathroom due to the fact most of that piping is horizontal.

The length of the branch should not exceed the limits established by code. The bigger the pipe diameter, the longer the allowed length for the pipe. For instance, most codes specify that 1 a half inch diameter branch arm can extend 5 feet from the stack to the trap, even though numerous further limit that to 3 1/2 feet. Most codes permit 8 feet for it to winch line and 10 feet for 3 inch line. You have to present something longer.

Re-vent: a revamped is really a vent added to a fixture drain when the primary vent is broken in some way. When a branch arm is too lengthy, for instance, when it should step up to accommodate structural barriers, you have to install a re-vent.

Wet and Dry Vents: a wet vent carries water too as air via some component of it piping. A basement bathroom provides a superb example for this simply because the vent for the toilet line also carries water from the tub and laboratory. Although wetlands are handy and efficient, they have their limits. Simply because air ought to share space with water, what vents are low volume vents. They can’t vent many fixtures. The drive vent does not carry water, so it has greater fixture capacity.
Widespread vent: a typical vent is really a single vent pipe that offers relief air to bore fixtures on the single branch line. When you are venting two fixtures on a single branch line, you have to location a typical event between the train outlets. When you are venting far more than to fixtures, install the vent between the last and second to last fixture outlets.

Loop Vent: you need to install a sink in the kitchen island; a conventional vent will not work. In this scenario, a loop vent may be the appropriate kind of vent to use. Loop vents simply handle the low volume fixtures and (like kitchen sinks) which can be installed in island cabinets.

Loop Vents do not extend to open air or tie into stacks or vent stacks. I have no direct, fresh air connections. Rather, and also the volume of air within the piping loop gives the required pressure relief. For this reason, Loop vents are also recognized as barometric vents.

Automatic Event Device: a nonmagnetic device can take the place of a loop vent. It consists of an inverted cup with the spring-loaded diaphragm. This spring permits the piping method to pull air from the cabinet space but keeps gas from escaping. It’s basically a type of check valve, permitting air to flow in only 1 direction.

Although automatic vent devices might be program savers, do not use them where it is feasible to install conventional fence. Since automatic bands have limited capacity, do not use them to vent high-volume drains or to vent much more than 1 fixture. Install them to ensure that they always remain accessible since they can wear out and might want replacing.

Plumbing Repairs

plumbers and heating technicians free ads

Most common misconceptions about plumbers.

downloadWhat stereotypes come to mind when you think of plumbers? Charlotte Plumbing & Repair plumbers Charlotte NC is not like other companies in the industry. That’s why we’re here to iron out 14 of the most common misconceptions about .

Plumbers make a mess. At Charlotte Plumbing & Repair , this simply isn’t true. We go to such painstaking lengths to respect your home that we actually leave it cleaner than when we found it. For instance, our are careful to park in the street to keep your driveway clear and they never walk on the grass. They even wear shoe covers to prevent tracking anything inside.
Plumbers are not . Perhaps images of smelly, rude, plaid shirt-wearing men are what come to mind when you think of plumbers.Charlotte Plumbing & Repair plumber couldn’t be further from this description. They are clean, polite and wear a professional uniform. You’ve never seen a more professional group of than Charlotte Plumbing & Repair plumbers.
Plumbers charge hefty overtime fees. Have a plumbing emergency? .
Plumbers take their sweet time getting to the residence. We have plumbers on call 24/7 to respond to emergencies in a timely fashion.
Plumbers make up the price as they go along. Our plumbers draw from years of training and experience to produce an accurate estimate before they start on the job. They explain exactly what steps are required for the repair or replacement and how much it will cost so you can decide if you want to go through with it. You’ll always get the price up front, before any work begins.
Plumbers do the work and stick the customer with the bill. Our plumbers keep you informed of any additional problems they find with the or hiccups that may arise during the repair so you’re not left with any unpleasant surprises on the bill.
Plumbers tack on hidden fees. We have clear, upfront pricing and always keep you in the know regarding your plumbing bill. Our plumbers are honest and never overcharge for parts or labor.
Plumbers take their sweet time so they can charge more. Our plumbers arrive promptly and get right to work. They complete the job with the perfect combination of speed and accuracy so the work is completed quickly with no callbacks required.
Plumbers use industry jargon and make the customer feel stupid. Our plumbers want you to understand their process and explain things in layman’s terms to prevent confusion.
Plumbers make far-fetched promises. At Charlotte Plumbing & Repair, we only hire the most professional, experienced plumbers, but even they can’t always work miracles. Our plumbers try their hardest, but they never make a claim unless they can accomplish it.
Plumbers think they know better than the customer. On the contrary, our plumbers know how important it is to ask clarifying questions if they don’t understand the problem. They respect your input and understand that you may have been living with the problem for some time now and therefore understand it well.
Plumbers are loudmouths. If you’ve ever worked with Charlotte Plumbing & Repair plumbers, you know they speak respectfully and calmly without sarcasm or profanity. They never say anything behind your back that they wouldn’t be willing to say to your face.
Plumbers often arrive without the right tools . While it’s true that replacement parts may take time to arrive, every dispatched Charlotte Plumbing & Repair van is equipped to handle any repair, large or small. From indoor faucet leaks to tree roots in your pipes, our plumbers can handle it all. Well-equipped vans prevent trips back and forth and let the job commence without delay.
Plumbers are rude. At Charlotte Plumbing & Repair, courtesy is one of the most important tools we carry. Our plumbers treat you with the respect and chivalry you deserve.

We recognize that exceptional plumbing is about more than clearing the drain clog or fixing the garbage disposal; it’s about assuring that you hired the right company from the moment a Charlotte Plumbing & Repair plumber enters your home. Contact us today to work with a different kind of plumbing company. .
(704) 394-5252.
plumbers charlotte nc, plumber charlotte nc.

Charlotte Plumbing & Repair

Choising the right contractor

(FEE72D11769931286AE8E0A5012B5C90
A problem with the waterheaters in the in the home can lead to significant architectural troubles which explains why having a Charlotte Plumbing contractor on call at any time continues to be a good idea. While the hope is usually that one will never demand the expertise of a Concord Plumbing business, it is best to always be protected than remorseful. Plumbers undertake education and learning to deal with a range of residential plumbing related problems, from your leaking commode to the dripping faucet and a lot more. Do not assume that almost all plumbing contractors are identical, however, as there are many differences in terms of quality and also rates, so you want to ensure you get the best.

You should ask family and friends whom they prefer since they will give you an honest assessment of different businesses contractor. Without having any person in the area you really feel content asking, do some research online seeing as there are many great web pages where evaluations may be read prior to choosing any plumbing contractor. After you have narrowed your own list to a few trained professionals contractor, hunt for assurances and then simply call to obtain estimations. Even though a professional plumbing service will tell you they need to come out and evaluate the trouble right before you’ll get a final price, they ought to be ready to tell you how much you pay for the service call and details of that nature. Last but not least, ensure the plumbing technician has the appropriate bonding and also insurance protection thus, when a problem does indeed arise, the plumbing company is going to be responsible rather than you. You ought to be shielded too while you safeguard the investment in the house repairs. plumbers charlotte nc, plumber charlotte nc.

What to do in a plumbing emergency

plumbers

Charlotte plumber sooner or later most homeowners will experience some type of plumbing emergency. Understanding what to do when a problem occurs will make the emergency much easier to deal with.

First, prepare yourself by locating the water shut-off valve, which is located next to your water meter. Once you have located your water meter, the valve next to it will be the water shut-off valve. By turning off the shut-off valve, you will stop all water from entering your home, thus minimizing water damage.

After you have shut-off the water supply, it is also a good idea to open all sink faucets to drain the water from the pipes to further minimize damage. Then, immediately call a plumber. Reputable, professional plumbers can usually send a technician out in a few hours. Follow any instructions given to you, while you wait for them to arrive.
It is also a good idea to use a mop, rags or paper towels to remove excess water, to help keeping water damage to a minimum.

In the case of overflowing toilets, you can shut-off the toilet water supply valve. This valve can usually be located between the bathroom floor and the toilet tank, on the water line supplying the toilet. If this is your plumbing problem, it is not necessary to shut-off the water to the entire home.

Clogged toilets and sink drains can sometimes be opened with a chemical drain opener. If this does not work, a plunger or snake can be tried to remove the clog. If these methods fail to open the clogged drain, you will need to call a plumber.

If it is a water heater problem, immediately shut the unit off. It is a good idea to locate the electrical shut-off switch beforehand. Also be sure to keep the telephone number of a licensed, professional plumber, with emergency services, handy. Handling a plumbing emergency can be made much easier, by following the steps above.

Are you facing a plumbing emergency in the Charlotte,Lake Norman area? Stop and call Charlotte Plumbing & Repair immediately at (704) 394-5252.

Leak Detection & Emergency Plumbing

Charlotte Temperatures Will Soon Plummet — Frozen Pipes Are A Real Possibility

insulated-pipes3

Charlotte doesn’t tend to get as cold as cities to the north, but temperatures can plummet below 20 degrees, and a storm can bring on a power outage. It’s wise to be mindful of what can do to your home. Frozen pipes, for example, are a real possibility.

You want to avoid this at all costs, as a pipe can burst and create a very messy situation.

Homes built as recently as the 1970s frequently lack sufficient wall insulation. This means that if a kitchen or bathroom sink is along an exterior wall, your plumbing could be exposed to more cold than it should be. As precautionary measures:

Insulate your pipes. Home improvement stores carry a range of plumbing-line insulation. Your options include foil and fiberglass. Perhaps the easiest option is tubular insulation, which can be cut to measure and wrapped around a pipe. All of these supplies are available at home-improvement stores.
Seal the gaps around the plumbing lines coming into your home. Expanding-foam should do the job.
You may even want to talk with your plumbing contractor about relocating your pipes, especially if they’ve locked up before. This tends to be an expensive alternative, but it may be worth discussing with your plumber.
If temperatures plummet before you can do your preventive maintenance, take the following measures:

Let your faucets slowly drip. This will help to prevent a freeze-up.
Open the cabinets under your sink. This will allow warmer air from the room to circulate under the sink.
If a pipe does freeze, try using a hair blower or a heating pad to thaw it. Never use a blow torch or any other flame. A better approach is who can get the pipe thawed before it bursts. The pipe, by the way, isn’t likely to burst where it’s frozen, but instead at a point between the ice and the faucet.
If you plan to be away for an extended time during the holidays, consider draining your system before you leave. Turn off the main valve, and let all the faucets run until no more water comes out. This should prevent a freeze-up while you’re gone.

At Charlotte Plumbing & Repair we know how important it is to keep your water lines maintained. We can help you do that, whether it’s winter or summer. Call us with any questions. We’re happy to help.