Tag Archives: plumber

plumber charlotte nc, plumbers charlotte nc, Plumbing, plumbing, Plumber

Friendly Environmentally Plumbing

There are a lot of means we can ease our influence on the environment. Making your home plumbing system more environmentally friendly is among them. Greening up your plumbing will have direct perks on the environment, and will save you cash in the long run says Charlotte Plumbing & Repair.

These 5 enhancements to your plumbing system will make the basic things you do every day much better for the environment:

Plumbing Repair Huntersville.
A domestic continuous made by Rinnai in Japan.

Tankless water heater. These energy-saving appliances significantly minimize your environmental effect. Water is rapidly warmed by a heating aspect that provides hot water on demand without a holding tank. Rather of heating 40 or more gallons of water 24/7, tankless water heaters only heat the water you make use of.

Low-flow commodes, fixtures and faucets. We’ve come a long way since the first low-flow fixtures and toilets were introduced to the marketplace. New technology has actually made them not just more reliable, but more effective. Updating your plumbing system with eco friendly fixtures minimizes the amount of water you make use of, and the amount of water you spend for.

Efficient appliances. Anything that makes use of water in your home belongs to your plumbing system. That consists of dishwashers, automatic ice makers, laundry equipment, water heaters and centralized humidifiers. Water is becoming a progressively important resource. The quality and price of water depend on our efforts to make our home water utilize more eco friendly. Update your plumbing system with efficient home appliances that make the most utilize from the least water.

Aerators. Faucet aerators pressurize water that originates from your tap. By presenting air to the stream of water, aerators reduce water use without decreasing water pressure. Aerators frequently increase your water pressure while decreasing overall flow of water in a house.

Pipe insulation. Water heaters are typically located in the basement or remote area of a house. The further hot water needs to travel to the sinks and appliances in your house, the even more heat is lost through the pipes that bring it there. A simple means to maintain more of that heat is to purchase and set up pipe insulation around your hot water pipes. The versatile foam insulation is inexpensive and easy to install. More importantly, it will make your hot water use more reliable and ecologically friendly.

Charlotte Plumbing & Repair hope you take a look at our homepage here too! WWW.charlotteplumbingsvc.com

plumbing, Plumber

Most common misconceptions about plumbers.

downloadWhat stereotypes come to mind when you think of plumbers? Charlotte Plumbing & Repair plumbers Charlotte NC is not like other companies in the industry. That’s why we’re here to iron out 14 of the most common misconceptions about .

Plumbers make a mess. At Charlotte Plumbing & Repair , this simply isn’t true. We go to such painstaking lengths to respect your home that we actually leave it cleaner than when we found it. For instance, our are careful to park in the street to keep your driveway clear and they never walk on the grass. They even wear shoe covers to prevent tracking anything inside.
Plumbers are not . Perhaps images of smelly, rude, plaid shirt-wearing men are what come to mind when you think of plumbers.Charlotte Plumbing & Repair plumber couldn’t be further from this description. They are clean, polite and wear a professional uniform. You’ve never seen a more professional group of than Charlotte Plumbing & Repair plumbers.
Plumbers charge hefty overtime fees. Have a plumbing emergency? .
Plumbers take their sweet time getting to the residence. We have plumbers on call 24/7 to respond to emergencies in a timely fashion.
Plumbers make up the price as they go along. Our plumbers draw from years of training and experience to produce an accurate estimate before they start on the job. They explain exactly what steps are required for the repair or replacement and how much it will cost so you can decide if you want to go through with it. You’ll always get the price up front, before any work begins.
Plumbers do the work and stick the customer with the bill. Our plumbers keep you informed of any additional problems they find with the or hiccups that may arise during the repair so you’re not left with any unpleasant surprises on the bill.
Plumbers tack on hidden fees. We have clear, upfront pricing and always keep you in the know regarding your plumbing bill. Our plumbers are honest and never overcharge for parts or labor.
Plumbers take their sweet time so they can charge more. Our plumbers arrive promptly and get right to work. They complete the job with the perfect combination of speed and accuracy so the work is completed quickly with no callbacks required.
Plumbers use industry jargon and make the customer feel stupid. Our plumbers want you to understand their process and explain things in layman’s terms to prevent confusion.
Plumbers make far-fetched promises. At Charlotte Plumbing & Repair, we only hire the most professional, experienced plumbers, but even they can’t always work miracles. Our plumbers try their hardest, but they never make a claim unless they can accomplish it.
Plumbers think they know better than the customer. On the contrary, our plumbers know how important it is to ask clarifying questions if they don’t understand the problem. They respect your input and understand that you may have been living with the problem for some time now and therefore understand it well.
Plumbers are loudmouths. If you’ve ever worked with Charlotte Plumbing & Repair plumbers, you know they speak respectfully and calmly without sarcasm or profanity. They never say anything behind your back that they wouldn’t be willing to say to your face.
Plumbers often arrive without the right tools . While it’s true that replacement parts may take time to arrive, every dispatched Charlotte Plumbing & Repair van is equipped to handle any repair, large or small. From indoor faucet leaks to tree roots in your pipes, our plumbers can handle it all. Well-equipped vans prevent trips back and forth and let the job commence without delay.
Plumbers are rude. At Charlotte Plumbing & Repair, courtesy is one of the most important tools we carry. Our plumbers treat you with the respect and chivalry you deserve.

We recognize that exceptional plumbing is about more than clearing the drain clog or fixing the garbage disposal; it’s about assuring that you hired the right company from the moment a Charlotte Plumbing & Repair plumber enters your home. Contact us today to work with a different kind of plumbing company. .
(704) 394-5252.
plumbers charlotte nc, plumber charlotte nc.

Charlotte Plumbing & Repair

plumber charlotte nc, plumbers charlotte nc, Plumbing, plumbing, Plumber

What to do in a plumbing emergency

plumbers

Charlotte plumber sooner or later most homeowners will experience some type of plumbing emergency. Understanding what to do when a problem occurs will make the emergency much easier to deal with.

First, prepare yourself by locating the water shut-off valve, which is located next to your water meter. Once you have located your water meter, the valve next to it will be the water shut-off valve. By turning off the shut-off valve, you will stop all water from entering your home, thus minimizing water damage.

After you have shut-off the water supply, it is also a good idea to open all sink faucets to drain the water from the pipes to further minimize damage. Then, immediately call a plumber. Reputable, professional plumbers can usually send a technician out in a few hours. Follow any instructions given to you, while you wait for them to arrive.
It is also a good idea to use a mop, rags or paper towels to remove excess water, to help keeping water damage to a minimum.

In the case of overflowing toilets, you can shut-off the toilet water supply valve. This valve can usually be located between the bathroom floor and the toilet tank, on the water line supplying the toilet. If this is your plumbing problem, it is not necessary to shut-off the water to the entire home.

Clogged toilets and sink drains can sometimes be opened with a chemical drain opener. If this does not work, a plunger or snake can be tried to remove the clog. If these methods fail to open the clogged drain, you will need to call a plumber.

If it is a water heater problem, immediately shut the unit off. It is a good idea to locate the electrical shut-off switch beforehand. Also be sure to keep the telephone number of a licensed, professional plumber, with emergency services, handy. Handling a plumbing emergency can be made much easier, by following the steps above.

Are you facing a plumbing emergency in the Charlotte,Lake Norman area? Stop and call Charlotte Plumbing & Repair immediately at (704) 394-5252.

Leak Detection & Emergency Plumbing

plumbing, Plumber

TANKLESS IN CHARLOTTE, Water Heaters

d205e13d-cbb0-4d28-bf74-242cbcc30390_1000

You can find a good-sized tank heater for a decent price in many places, but these inexpensive heaters may not always be the bargain they seem to be.

These are typically in the 40-50 gallon range, and they will heat water so that you have that many gallons available when you need to wash dishes, take a shower, wash the dog, or whatever.

The tank unit works by warming that amount of water and then holding it ready, just in case you need it. This means the water is kept at a steady 160 degrees (or whatever temperature you set it to), at all times of day.

The heater thus is going on and off all day and all night to keep the water hot. Your Charlotte electric bill reflects this.

It sounds like that cheap water heater may not be so cheap, doesn’t it? Yikes!

Hot Water Loss and Limited Supply

Traditional tank heaters lose heat steadily. As the tank stands full with hot water, that warmth is lost through heat that basically seeps away. Picture a tea or coffee mug. As the tea or coffee cools, that heat is lost.

Even though your heater is insulated, there is still significant heat lost as it radiates away. That heat loss can be as much as 20 to 40%.

Another drawback of traditional “cheap” water heaters is that the hot water can get used up. If one person takes a shower, he may actually use up all the water that is hot. Then the next person needs to wait 30-60 minutes to get hot shower.

What a drag!

An Efficient Alternative to Cheap Water Heaters

Consider a Tankless Heater.

You may also have heard of these called “point-of-use” heaters, “on-demand” heaters, or “electric instant hot water heaters.”

What this means is that the heater provides hot water when you need it.

There is no water stored. When you turn on the hot faucet, the on-demand heater warms up the water so you can take a shower for as long as you want, and then lets the next person shower, too – all without running out of hot water.

Why is this a better alternative to the cheap tank heaters you find at your Charlotte home improvement store?

Quite simply, cheap water heaters do not prove to be cheap in the long run.

Benefits of “Cheap Water Heaters”

You may want to reconsider what you think a cheap water heater is, since the research has shown that what may have been the cheap heater initially may not be the cheap heater in the long run.

Point-of-use tank heaters can be initially more expensive. However, think about this: Point-of-use heaters can save as much as 50% over your current heating expenses! An on-demand heater will only provide hot water when you need it, so there is no need to continue to heat water if you aren’t using it. No more day-and-night heating bills.

On-demand heaters are also cheap heaters because they don’t wear out like traditional tank units. Traditional units have a typical life of 6 to 12 years before needing to be replaced.

A tankless water heater can last 20 years and more, since they don’t have hot water “sitting” in the tank and corroding internal parts. Hard water scale and deposits can greatly reduce the life and efficiency of a tank heater.

Tankless heaters are also space-efficient. They take up a lot less room in your Charlotte home than their traditional counterparts. Imagine having your water heater hang on the wall, taking up only as much space as a briefcase!

One other benefit of this type of cheap water heater is their safety record. Traditional tank heaters require you to set a minimum temperature, which is often much higher than you really need. Point-of-use heaters allow you to set the temperature where you will use it, preventing scalding issues and more energy loss.

So what do you think? Which is really the cheap water heater?

You may find it helpful to consult your Charlotte Plumber. who can provide you with extensive information about tankless water heaters, and when you’ve reached your decision, safely and efficiently install your water heater.

plumbing, Plumber

A DAY IN THE LIFE AS A PLUMBER

Link

:

Posted By: Charlotte Plumbing& repair
Sometimes in the plumber profession, things go smoothly, and according to plan. Other times, or rather, MOST of the time, things always seem to go a little sideways. We recently got an email from one of our most frequent and best customers explaining a few minor plumbing jobs that needed to be done on a newly purchased property. On these older homes, it is always a good idea to take a look at them to see what we would be getting in to. The list seemed simple enough- new toilet seat, disconnect gas line to stove and add a shutoff valve, replace kitchen sink and faucet, and replace the bathtub faucet. All of these items were pretty simple on their own, and I had explained that it should be possible to stay within his plumber budget. The next day I started the work and it wasn’t until I headed downstairs that things got interesting. I noticed a few additional problems pretty quickly, such as a rusted-away tub drain and a few water lines that had been split. Even these few problems that were visible where not enough to cause too much concern. I promptly made my way through all of the problems that were noticeable. All of these issues are pretty common with older homes plumber, especially with the old galvanized steel water lines and cast iron drains. When everything APPEARED ok, I slowly started to turn the water on, and this is when the fun began. Within seconds, a slow drip developed, right next to my head. The galvanized pipe was split on the seem on the top of the pipe. Water off, repair made- #1. When that was fixed, it was now time to try again plumbers. I slowly turned the water on, and a little bit further down the line, I see water pouring onto the floor. This time there was a crack in the threaded portion of the pipe. Water off, repair made- #2 plumber. This pattern continued for no less than 6 repairs before I eventually had to call it a day and plan on a round 2 the next day. By the time I was able to get the water on, 75% of the house had been replaced with pex water lines. On day number two I eventually decided to cut my (his) losses and simply start cutting most of the old water lines out plumber. There were a few lines that remained in the walls that were copper, so those remained in tact, even though a few of the fittings had blown apart. What appears to have happened in this house is that it never got properly winterized and literally EVERYTHING froze, EVERYWHERE plumbers. Now that the water was on, I had a slight bit of optimism that I was almost going to be able to get out of there. Of course this was not the case because we are dealing with old plumbing. The toilet would not fill at all due to a completely corroded galvanized line serving it. I had to turn the water back off, and run a new line with a new shutoff valve to the toilet plumber. After the toilet was working, I turned the water on at the dual lavatories and the faucets both worked great, to my surprise! What I was not surprised by though was the fact that the water did not go down the drain AT ALL. After pulling the p traps off both lavs and snaking the main drain serving them, I got all of the water to go where it was supposed to. I was even lucky enough to find a handful of hair ties, straws, toothbrushes, and toys along the way plumber. If you are ever considering purchasing an older home for yourself, to flip or to rent out, keep your plumbing budget plenty high in case of unforeseen problems, which are almost always going to be there. Allow a professional plumber to take care of it for you, and save yourself days, weeks or even a lifetime of Charlotte plumber headaches charlotte plumbing repair.

plumbing, Plumber

The Charlotte Plumber

Link

The CHARLOTTE PLUMBER.

 

The Charlotte Plumber is about providing the best plumbing  jobs, service, list, supplies, plumbing, equipment, plumbers and tools to solve your Charlotte plumbing emergencies for water, get The Charlotte Plumber for CHARLOTTE Plumbing  24/7 Charlotte NC

The Charlotte Plumber | Charlotte Plumber | Plumbing NC: 7 Questions to ask a Charlotte Plumber before buying plumbing suppilies and equipment in Charlotte, Concord, Mooresville, and Ballantyne, NC

Best Charlotte Plumber: The best prices and top things to look for from plumbing suppliers and service contractors.
How an established, recommended and preferred plumbing business can save you money when building or fixing a new house or constructing a new commercial building.

The Charlotte Plumber: A good CHARLOTTE Plumber for a good NC Plumbing  Job is crucial to maximize the efficiency and  power useage of any house or commercial buildding in Charlotte, NC, NORTH CAROLINA…..

Plumber List!

The Charlotte Plumber – NC Plumbing Jobs:  NC Plumber  will  install all the piping and fixtures for a new home which is a crucial aspect of any new building, also the layout and planning of the fixtures, piping and positioning of all the appliances.
Charlotte Plumber jobs : Charlotte Commercial plumber installation jobs for major piping, fixtures and fire protection equipment in commercial and industrial facilities requires dedicated equipment and expert plumbers.

The Charlotte Plumber – Charlotte Plumbing  – Charlotte Plumbing Repairs : All bathrooms, utility rooms, kitchen and landscaping area need to be properly connected in order to have a good functional North Carolina plumbing system.
The CHARLOTTE Plumber – CHARLOTTE Plumbing – CHARLOTTE Plumbing Service: When your plumbing stops working, havoc can occur in your house or business and high priced damage can occur when pipes burst or fixtures have been installed incorrectly.

The Charlotte Plumber – Charlotte Plumber  Emergency: Some emergency plumbing service and situations can be avoided!

Best Charlotte Plumber/Plumbing Emergencies Service: Most plumbers report that negligence is responsible for some items, liquid and solids causing stubborn obstructions in drains and defective pipes that leads to flooding.
Charlotte Plumbing Problem – Plumbing NC: When the faucet starts to drip you should call The NY Plumber, do not waite until you have a plumbing emergency and it is too late to undo the damage done to your home or business.

A Charlotte Plumber can provide general preventive maintenance for the home and business plumbing  every once in a while, it will not only keep plumbing fixtures, drains and pipes in good condition for a long time, but will further allow you to spot early problems and have them fix.

The Charlotte Plumber: Charlotte Plumber is the plumber you call when you encounter an emergency plumbing problem….. you can take steps to reduce damage to the minimum, hence cutting down your plumbing cost.

The Charlotte Plumber: Charlotte  Plumber for Charlotte Plumbing Maintenance and  Charlotte Plumbing Repairs
Charlotte Plumber: The Charlotte Plumber will install and/or repair water heaters, showers, spetic tanks, gas lines oil lines and tanks, boilers, sewers, high pressure cleaning systems, commercial laundry systems, kitchen sinks, gas leaks, water meters, radiators, cloged toilets, jacuzzi, grease traps and more.

Charlotte Plumber: At The Charlotte Plumber you will find professional plumbers or plumbing service contractors to fix your plumbing problems using the best supplies make of brass. copper, plastic or a preferred material, today. Check the at: http://www.charlotteplumbingsvc.com Continue reading The Charlotte Plumber →

plumbing, Plumber

Should I Call a Professional Plumber to Unclog My Drains?

Link

:

Clogged drains are one of the most common questions posed by homeowners, says Charlotte plumbing & repair of Charlotte NC.  It is not advisable to use a chemical drain cleaner in a fixture that is completely blocked.  The most powerful cleaners contain lye, a caustic compound that is dangerous and can harm fixtures if left too long in them.  If the chemical cleaner does not clear the drain, you will be exposed to the caustic when you open a clean-out plug or remove a trap.

There are a couple of variables at play when determining whether you can unclog a toilet yourself or not. The first is the location of the clog. If it is too far down the drain pipe, the only choices may be to use an augur (which most homeowners don’t have – you can rent one or buy one at a hardware store) or to call your local Seattle plumber and get them to hydro jet your system. The second variable is the composition of the actual clog, or if it’s too densely packed, then no amount of do-it-yourself unclogging is going to work.

Charlotte Plumbing & repair Tip of the Week

 Tip # 1  Using a plunger:  Begin by removing the sink strainer or pop-up drain plug.  If there is an overflow opening—most kitchen sinks have none—plug it with wet rags.  Any air gap provided for a dishwasher also must be plugged.  Be sure there is enough water in the basin to cover the plunger cup completely.  Coat the rim of the cup evenly with petroleum jelly and center the cup over the drain hole.  Without breaking the seal between the drain and the cup, pump down and up with short, rapid stroke 10 times, then jerk the plunger up from the drain quickly.

Tip #2  Using an auger:  With the strainer or pop-up stopper removed, feed a drain-and-tap auger into the drain by cranking the handle clockwise.  As you push the auger wire farther into the drain, alternately loosen and tighten the thumbscrew on the auger handle.  When you hook something move the auger backward and forward slowly while cranking, then withdraw the auger wire slowly while continuing to crank in the same direction.  Pour hot water and detergent through the trap to clear away residual grease or oils.

Tip #3  Working through the clean-out plug:  If the trap under the clogged fixture plumbers has a clean-out plug, place a bucket under the trap and remove the plug.  After water has emptied from the trap, straighten a wire coat hanger, form a small hook in one end, and probe through the trap.  If the obstruction is near the opening, you should be able to dislodge it or hook it and draw it out.  If not, feed a drain-and-trap auger first up to the sink opening, then through the back half of the trap. Call http://www.charlotteplumbingsvc.com

plumbing, Plumber

How can I tell if my water and waste pipes are old and corroded?

Link
This article’s intent is to help you diagnose water quality and water pressure along with drainage issues with your potable water and waste pipes. Older homes built before the 1980’s did not have many options as far as plumbing materials go. The most readily available materials were cast iron and galvanized iron pipe. Unfortunately there was not enough technology, research or even thought put into what will happen to these materials down the road. As the result plumbers nationwide have to constantly service and in most cases rip out the entire systems and install new modern systems such as copper, PEX (Polyethylene Cross Linked), ABS, and PVC. If you notice you have slow drains or they do not drain at all, then you may have galvanized iron drains. If you notice low pressure or low flow from your faucets then you may have galvanized iron water lines.
  First of all let’s state the fact that not all iron systems are bad. In fact cast iron drains seem to have an average 40 – 60 year life span. This means if your sewer main is cast iron and has no signs of constant plugging issues or leaks then if it isn’t broke don’t fix it. However, majority of cast systems inside of the building used galvanized drains for all of the branch lines such as tubs, showers, and sinks. Plain and simple, these drains are the worst. Some severe cases will not drain at all and cannot be snaked out. You ask why can’t they be snaked out and I will explain. Modern pipe systems are designed to maintain a smooth path way for fluids and solids. This prevents solids from being caught and eventually blocking the pipe off. Glued fittings such as ABS or PVC, if installed correctly, prevent this from happening. The reason iron does not provide this is simple, it is a corrosive material. Corrosive metals, even treated, will eventually scale and rust from long term exposure to water and chemicals. One other important reason is that it is not maintainable due to original Plumbing contractor error.
  Galvanized drains are threaded pipe turned into the threaded hub of a fitting. If the original installer buried the pipe too deep into the hub you will have a jagged ridge of pipe penetrating into the water way. This is where a service technician will no longer be able to help you. As you push a sewer snake cable into the fitting the end of the cable will bind on that ridge and prevent the cable from passing through the hub. At this point you are out of luck. Last ditch attempt is to use some pure sulfuric acid but that rarely works because there is too much build up. Please note you should never dump sulfuric acid down a disposal because it can severely damage the unit and could blow nasty acid all over you. Please use extreme caution and safety equipment when using such a chemical. Only option left at that point is to remove all of the galvanized drain lines from above the flood level of the fixture in which it serves to the main cast iron trunk line with either ABS or PVC.
  Most all older production homes used galvanized iron water lines. This was at that time period the most common and cost effective way to plumb potable water. If you are lucky the plumbing company

spent a little extra and used copper. If you experience bad water pressure or flow it could be from under sized piping but in most cases it is corroded galvanized pipe. Not only did they almost always under size the system, but the pipes have approximately a 40 year life span depending on your water quality and electrolysis issues. 
  Galvanized water piping will commonly leak at the joints and fittings of a branch arm. This happens because upon installation of the pipe it is thread with a threading machine. When you thread galvanized pipe it removes the galvanized coating at the threads as well as thins the pipe. This is why the most common place for this type of system to leak is at the joints.
  Electrolysis happens when two or more types of metal touch and water flows through them creating an electrical charge that immediately breaks down the softer metal, usually the copper goes first. Finally the most common is natural corrosion. This happens naturally and can be sped up by hard water and other chemicals pumped in by the city’s water supply.
  Once any or all of these things happen the scale inside of the pipe will break off and end up plugging your faucets flow restrictors, faucet aerators, shower cartridges, and shower heads. If you experience any of these symptoms then you probably have this type of pipe and should consider having a licensed Plumber provide you with an estimate to
re-pipe your entire water system charlotte nc.
plumbing, Plumber

Charlotte plumbing & repair save water

Link

Let’s face it; Summer has always been a Water Hog! Whether it’s washing your car, filling up the pool, watering your yard or multiple showers after a trip to the beach, your monthly water bills tend to swell up during the summertime, but they don’t have to.
4It’s everyone’s responsibility to do whatever they can to help preserve our natural resources and consistent water conservation reduces your energy needs and puts money back in your pocket.
You might be surprised, but making a few simple changes or modifications around your house can have an impact on our water supply, your monthly energy consumption and reduce your monthly utility bill all at the same time.
Being a part of the solution feels so much better than being part of the problem! Join the Southlands ever growing proactive water conservation effort to help preserve our natural resources and save a few bucks while you’re doing it.

SIMPLE AND INEXPENSIVE TIPS TO CONSERVE WATER AND SAVE $$
Replace Old Faucets & Showerheads with New Energy Saving Models
2Showers are responsible for 18% of all indoor water use in the United States. A recent study estimates that American’s use over 300 billion gallons of water each day. That’s 250 gallons per person, per day for every person in America. Help conserve our limited natural resources by using any of the following methods to reduce your water usage while lowering your monthly utility bill.
Simply changing your current shower head to a high performance energy efficient model shower head can reduce your shower’s water use by up to 60%. Older model showerheads use between 4-5 gallons per minute while newer energy efficient use only 1-1.5 gallons per minute without a significant reduction in water pressure.
Another simple way to reduce your water usage is by installing newer more efficient faucets in your high use areas. These faucets use about 1.5 gallons of water per minute compared with a standard faucet which uses 3-5 gallons per minute. In fact, the EPA states that simply adding pressure reducing valves or aerators to your existing faucet, set to reduce pressure by half, can reduce water consumption by 1/3 and aerators that are added directly to faucets can reduce water use by up to 60% without having any effect on your water pressure.
Replace Old Runny Toilets with New Energy Efficient Models
3The average toilet uses 4.5 gallons of water per flush, but you can reduce your water usage per toilet by as much as 34% by replacing your old conventional toilet with a new low-flow toilet that uses 1.2 gallons per flush. New energy efficient and water conserving toilets aren’t cheap, but there are some extremely cheap alternatives that offer water conservation with cost savings as well. One of the most practical methods is to simply place a heavily weighted object, such as a brick or plastic container filled with rocks, in your toilet tank. The brick, or rocks, displaces the water in your toilet’s tank and it takes less water to fill it.
Additional Easy & Simple Ways to Save Water & Money

4Select the proper size pans for cooking. Large pans require more cooking water than may be necessary.
Make sure there are aerators on all of your faucets. Install an instant water heater on your kitchen sink so you don’t have to let the water run while it heats up. This will also reduce heating costs for your household.
Keep a pitcher of water in the refrigerator instead of running the tap for cold drinks, so that every drop goes down you not the drain.
Don’t use running water to thaw food. Thaw your food in the refrigerator and especially if it’s beef, fish or poultry.
When you clean your fish tank, use the water you’ve drained on your plants. The water is rich in nitrogen and phosphorus, providing you with a free and effective fertilizer.
Time your shower to keep it under 5 minutes and you’ll save up to 1,000 gallons a month
Run dishwashers and washing machines on the light load setting and only run them with full loads. Note that this will also save money on your electric bill.
Turn off the water while brushing your teeth

Outdoor Water Conservation, Energy Reducing and $$ Saving Ideas

5Sweep leaves and other debris off driveways and walkways instead of hosing
Install outside rain catcher systems to irrigate your landscaping
Mulch, Mulch and More Mulch! Use bark chips to help retain water and moisture on flower beds to hold moisture more effectively. Mulch should be 2-4 inches deep which helps with soil temperature, weed control and improves water penetration
Use drip line watering in your flower beds and get less waste due to evaporation
Avoid watering during the hottest periods of the day to prevent loss through evaporation
Use slow release or low-concentration fertilizer and you shouldn’t over fertilize plumbers
Call Charlotte plumbing & repair 704-394-5252 for all your plumbing needs. Http://www.charlotteplumbingsvc.com

plumbing, Plumber

Valves: The Control Freaks of Your Plumbing

Link

:

:

The idea is simple: Keep the water from coming out when you don’t want it to, and when you do want it to come out, be able to control the flow. There. That’s what your valves do for you. While valves may not seem like something you want to think about in the course of your daily life, there are times when, for some homeowners, they take a front and center place in one’s thinking. Let’s look at some examples:

You are building a new home or remodleing your bathroom and you come to the fun part of getting to pick out what style of faucets you want to decorate with. Those faucets? They’re just fancy looking valves.
When you hit the flush handle of your toilet and nothing happens that’s usually going to be a valve issue. Either the fillvalve (old timers know it by the name “ballcock”) is not working right or that very simple valve known as a “flapper” is misbehaving.
That dripping hose spigot on the outside of your house is a valve (old timer name: sillcock). By the way, charlotte plumbing repair can fix or replace that. . . just sayin’.
You smell a gas leak in your home. Someone will need to turn a valve off to stop the flow of gas. In fact, it could be a gas valve that is causing the problem. Did you know that licensed plumbers like Charlotte Plumbing & repair are the ones who find and repair the vast majority of gas leaks in homes? It’s true.

There are lots of other valves in your home, of course, such as those under your sinks, on your water heater, at your water softener, sump pump, etc. Valves are great friends when they are not leaking and are easy to turn on and off, but no one likes to find out that a valve is too corroded to use when the time comes.
If you don’t know anything else about the valves in your home, make it your mission to know about this one: The main water shut-off valve. This is the one that turns the water on or off to your entire house. Your main valve is the one you can go to in a plumbing emergency to stop the pressurized flow of water into your home. If you don’t know where it is located or whether it is working properly, find someone who will locate it for you and try it out to make sure you can turn it easily plumbers.
Lastly, if you’d like to know that your valves are in good working order and would like to have someone familiarize you with your main water shut-off, you can always call Charlotte Plumbing & Repair to come out and do that for you. Http://www.charlotteplumbingsvc.com